Plumbing
-
FYNSPRAY GALLEY PUMP SPOUT WS66
WHITE STAROriginal price $79.18 - Original price $85.57Original price$79.18 - $85.57$79.18 - $85.57Current price $79.18| /High quality all brass construction makes this swiveling spout the perfect addition to your foot pump system. Rugged and long lasting, available in...
View full details -
FYNSPRAY IMPELLER 3/8 WS35/8
WHITE STAROriginal price $65.00 - Original price $65.00Original price$65.00$65.00 - $65.00Current price $65.00| /Impeller for Fynspray WS35 Pump Pump size - 3/8" Impeller Depth - 22mm Impeller Diameter - 53mm Shaft size - 1/2" Shaft length - 128mm
-
FYNSPRAY PLUG & WASTE WS65
WHITE STAROriginal price $25.70 - Original price $63.75Original price$25.70 - $63.75$25.70 - $63.75Current price $25.70| /Fynspray Sink Waste and plug fittings. Available in white nylon or chrome plated brass finish. The smaller size makes these ideal for sinks and was...
View full details -
FYNSPRAY PUMP CONVERSION KIT WS62/22
WHITE STAROriginal price $44.40 - Original price $44.40Original price$44.40$44.40 - $44.40Current price $44.40| /Conversion kit for Fynspray WS62 galley pump. Converts the pump to use the newer nitrile washers for longer times between services.
-
FYNSPRAY ULTRA GALLEY PUMP WS67
WHITE STAROriginal price $149.06 - Original price $149.06Original price$149.06$149.06 - $149.06Current price $149.06| /High quality NZ Made Fynspray galley pump. Double action. Takes up little space. Very reliable. Chromed brass spout for salt or fresh water usage. ...
View full details -
HANSEN METEOR BILGE PUMP
HANSENOriginal price $674.82 - Original price $674.82Original price$674.82$674.82 - $674.82Current price $674.82| /"In Boating circles there is a truism, that the most efficient bilge pump in the world is a frightened sailor wielding a bucket. Most times boating...
View full details -
HANSEN METEOR PUMP OVERHAUL KIT
HANSENOriginal price $193.20 - Original price $193.20Original price$193.20$193.20 - $193.20Current price $193.20| /HANSEN METEOR BILGE PUMP - OVERHAUL KIT INCLUDES: •1 x Diaphragm •2pcs Diaphragm clamps •1 x Door Gasket •2 x Flapper valves •S/S Fastener kit
-
HANSEN METEOR PUMP SERVICE KIT
HANSENOriginal price $124.13 - Original price $124.13Original price$124.13$124.13 - $124.13Current price $124.13| /Service Kit for Hansen Meteor Bilge Pump. Includes *1 x BPS/2S Diaphragm *1 x BPT/5 Door Gasket *2 x BPT/4 Flapper Valves
-
HENDERSON SINGLE ACTION MANUAL PUMP MK 5
BLAOriginal price $179.90 - Original price $179.90Original price$179.90$179.90 - $179.90Current price $179.90| /Henderson Mk5 Manual Bilge Pump This is a versatile bilge, waste, or water transfer pump in a lightweight but robust construction of tough plastic....
View full details -
HEX NIPPLE BRONZE BSP
General MarineOriginal price $14.05 - Original price $28.80Original price$14.05 - $28.80$14.05 - $28.80Current price $14.05| /Bronze BSP threaded Hex Nipple with external thread. For joining pipes and fittings of the same diameter. Available in multiple thread sizes.
-
HEX PLUG BRONZE BSP
PLUMBINGOriginal price $6.90 - Original price $36.23Original price$6.90 - $36.23$6.90 - $36.23Current price $6.90| /Bronze BSP threaded hex plug. For blanking of plumbing pipes and fittings. Available in multiple sizes.
-
HOMER BUNG EXPANDING LEVER
HOMEROriginal price $8.39 - Original price $8.68Original price$8.39 - $8.68$8.39 - $8.68Current price $8.39| /Homer Stainless Steel or Brass flip top drain plug. Fits 25mm tube. Pull lever down to expand and seal.
-
HOMER CLAMSHELL DRAIN COVER S/S
HOMEROriginal price $3.17 - Original price $28.31Original price$3.17 - $28.31$3.17 - $28.31Current price $3.17| /Small stainless steel clamshell vent. Ideal as an attractive covering for anchor locker drains or tank vents. Available in three sizes: SMALL - Wid...
View full details -
HOMER COMPARTMENT DRAIN HOOD S/S
HOMEROriginal price $25.59 - Original price $25.59Original price$25.59$25.59 - $25.59Current price $25.59| /Homer Compartment Drain Hood 316 Stainless steel with nylon thread. Length can be adjusted. Perfect for anchor wells. Thread size: 19mm (3/4") We...
View full details -
HOMER DECK FILLERS 38MM 316 S/S
HOMEROriginal price $63.75 - Original price $63.75Original price$63.75$63.75 - $63.75Current price $63.75| /Homer 38mm Pipe Deck Filler cast in 316 Stainless Steel. Available with "Water" "Waste" or "Diesel" label. Fits 38mm hose. Flange Diameter: 75mm ...
View full details -
HOMER FLUSH FUEL TANK VENT 316 S/S
HOMEROriginal price $15.00 - Original price $19.95Original price$15.00 - $19.95$15.00 - $19.95Current price $15.00| /Homer Straight Tank Vent Flush mount with cup. Marine Grade 316 Stainless Steel. Available in two hose sizes.
-
HOMER FUEL TANK VENT 316 S/S
HOMEROriginal price $15.00 - Original price $15.00Original price$15.00$15.00 - $15.00Current price $15.00| /Homer Round Head Fuel Tank Vent 316 Stainless steel.
-
HOMER TANK VENT 12.7MM 316 S/S
HOMEROriginal price $8.95 - Original price $8.95Original price$8.95$8.95 - $8.95Current price $8.95| /Tank Vent 12.7mm 1/2" for fuel or water tank. 316 grade Stainless Steel. Thread: 1/2" BSP Fits: 1/2" hose Tail Length: 30mm Max panel thickness: 16mm
-
HOMER TANK VENT C/W SCREEN 316 S/S
HOMEROriginal price $31.03 - Original price $31.03Original price$31.03$31.03 - $31.03Current price $31.03| /Homer Tank Vent 316 stainless steel with stainless steel screen. May be used as either a fuel or water tank vent. Thread: 19mm Hose Size: 10MM (3/...
View full details -
HOMER WATER VENT 316 S/S
HOMEROriginal price $39.19 - Original price $70.03Original price$39.19 - $70.03$39.19 - $70.03Current price $39.19| /Homer Water Tank Vent 316 Stainless Steel. Round Head with fully threaded tail. BSP thread.
-
HOSE CONNECTOR ELBOW TRUDESIGN
TRU DESIGNOriginal price $3.49 - Original price $12.09Original price$3.49 - $12.09$3.49 - $12.09Current price $3.49| /Connectors 90° Bend Hose connectors to facilitate routing of hoses around 90° corners, reducing crimped hoses and stress on hoses Features •Long ...
View full details -
HOSE CONNECTOR TRUDESIGN
TRU DESIGNOriginal price $3.14 - Original price $7.51Original price$3.14 - $7.51$3.14 - $7.51Current price $3.14| /Connectors Inline Designed as a connector for same size hoses •Long tail feature - The use of 2 hose clamps is recommended for secure hose fittin...
View full details -
HOSE REDUCER TRUDESIGN
TRU DESIGNOriginal price $3.14 - Original price $6.05Original price$3.14 - $6.05$3.14 - $6.05Current price $3.14| /Trudesign Reducers for connecting hoses of different sizes. Designed and made in New Zealand, Tru-Design Reducers are moulded from a glass reinfor...
View full details -
HOSE TAIL 120 DEG TRUDESIGN BSP
TRU DESIGNOriginal price $8.53 - Original price $18.42Original price$8.53 - $18.42$8.53 - $18.42Current price $8.53| /Tail Long Thread 120° TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the mat...
View full details