Dinghys Fittings

A compact black nylon cleat with integral fairlead to guide the rope into the teeth. Same hole centres as CL209 and CL254 ROPE SIZE: 4-8MM BASE DIM...

An elegant design in black or white nylon. The rope drops down into the teeth. Uses include control lines for dinghies, kayaks and greenhouse vents...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

The teeth in this cleat are above the rope so that when uncleated the rope automatically drops away and can run freely. Making it Ideal for through...

Double your pulling power AND take the pain out of pulling smaller ropes. CL261 Power Grip 1 allows you to pull twice as hard, compared to using yo...

Take the pain out of pulling smaller ropes. CL262 Power Grip 2 allows you to pull about 4 times as hard, compared to using your bare hands. Light, ...

A clamcleat which can be easily released even while under load. Simply pull the release cord and the cleat flips over, allowing the line to pull ou...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ide...

A very strong alloy cleat in hard anodised finish. ROPE SIZE: 3-6MM BASE DIMENSIONS: 82 x 18mm

A very strong alloy cleat in hard anodised finish. ROPE SIZE: 3-6MM BASE DIMENSIONS: 82 x 18mm

The bottom roller allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Hard anodised finish. ROPE SIZE: 3-6MM ...

The becket holds the end of the rope under the cleat. No need for an extra fixing. BASE DIMENSIONS: 82 X 18MM ROPE SIZE: 3-6MM Manufactured from H...

With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

With the CL254 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Will hold very high loads when used wi...

An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. ROPE SIZE: 3-6MM BASE DIMENSIONS: 48 X 15MM

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The tooth design allows a quick, positive lock that is easy to release, add to this its low profile and ability to hold high loads, makes it ideal ...

The red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat. Silver Anodi...

With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for ligh...

Rivet-on pulley block for use with CL248. The becket holds one end of the rope so that a 6:1 advantage can be rigged. The curved base allows fittin...

The roller fairlead allows ropes to enter the cleat from above. Hard anodised finish. ROPE SIZE 3-6MM

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey hard anodising ROPE SIZE: 3-6MM BASE DIMENS...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Finished in grey Hardcoat anodizing ROPE SIZE: 3-6MM BASE DI...